Hood D3100-I IDSL Manual do Utilizador descarregar pdf (Página 15)

RS-232 protocol reference

IPAD ? Queries the IP addresses associated with the connectivity

module. The notification takes this form:

*IPAD=IP_addr_1, IP_addr_2

where:

• IP_addr_1 = the IP address of the module’s LAN

connector.

• IP_addr_2 (if present) = the IP address of a wireless

network card connected to the connectivity module.

For example: *IPAD=15.7.123.54, 15.7.123.55

SNUM ? Queries the projector’s serial number.

Power and status functions

SHDN None Puts the projector into cool-down state, and later into

standby state. The projector sends a notification when it

enters cool-down state (STAT=3), and another when it

enters standby state (STAT=0).

Note: This keyword requires the projector to be in its on

state (STAT=1).

Note: Do not send any requests other than STAT in the time

between the cool-down and standby state notifications.

Otherwise, unexpected results can occur.

W None Puts the projector into warm-up state, and later into on

state. The projector sends a notification when it enters

warm-up state (STAT=2), and another when it enters the on

state (STAT=1).

Note: This keyword requires the projector to be in standby

state (STAT=0).

Note: Do not send any requests other than STAT in the time

between the warm-up and on state notifications.

Otherwise, unexpected results can occur.

RS-232 keyword listing

(continued)

Keyword Parameters Description

1 2 ... 10 11 12 13 14 15 16 17 18

Sem comentários

Hood D3100-I IDSL Manual do Utilizador Página 15